3 Series E36 318i (M43) CONVER
24 12 015
Replacing radial seal for output flange (A4S
270R/ 310R)
Remove propeller shaft,
refer to 24 00 025 .
E46 with A4S 310R Remove propeller shaft,
refer to 26 11 000 .
Remove output flange.
Brace output flange with special tool 23 0 020 (retaining
wrench).
Unscrew collar nut with a wrench socket. Pull off output flange.
Lift out radial oil seal (1).
Lubricate sealing lip with ATF.
Drive in radial seal with special tool 23 1 370 (impact bush).
Mount and bolt output flange.
Tightening torque,
refer to Technical Data.
Check ATF level again, correcting if necessary.
RA Replacing radial seal for output flange (A4S 270R/ 310R)
BMW AG - TIS
24.01.2013 09:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -