3 Series E36 318i (M43) CONVER
If necessary, unscrew interlock cable (1).
Lift out snap ring (1) and take off with sleeve (2).
Installation:
Fit bush (2).
Attach snap ring (1) with special tool 32 1 090 and steering
wheel retaining screw, tightening it until it engages in groove
on steering spindle.
Snap ring (1) can also be mounted using special tool
32 3 070.
Lift out and remove steering-spindle bearing.
RA Replacing complete steering lock
BMW AG - TIS
24.01.2013 10:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -