3 Series E36 318i (M43) CONVER
33 55 040
Replacing stabilizer link for stabilizer
Remove stabilizer bar.
Clamp stabilizer link in vice with protective vice jaws and pull off
stabilizer bar with rotary motions.
If rubber mount remains on stabilizer bar, cut through rubber
mount with knife and pull off.
Clamp new stabilizer link in vice with protective vice jaws.
Moisten end of stabilizer bar and rubber mount inside with
Circolight mounting agent, refer to BMW Parts Service.
Press stabilizer bar as far as possible into stabilizer link with rotary
motions.
Immediately rotate stabilizer link into illustrated angular position to
stabilizer bar. Once mounting agent has evaporated, stabilizer link
can no longer be rotated.
RA Replacing stabilizer link for stabilizer
BMW AG - TIS
24.01.2013 11:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -