3 Series E36 318i (M43) CONVER
52 10 131
Removing and installing/replacing actuator
drive for front seat adjustent (longitudinal
adjustment)
Note:
Move seat up as far as possible.
Remove seat cushion,
refer to 52 10 079
Unscrew bolts.
Loosen cable straps (1) and (2).
Pull off protective sleeve. Disconnect plug.
Unlock and pull off plug receptacle in forward position.
Note:
Tilt seat cushion shell upwards and hold in this position (e.g.
support with a hammer).
Actuator drive secured with 3 screws:
Remove screws (1) and (2).
Remove forward/back control drive towards rear.
RA Removing and installing/replacing actuator drive for front seat adjustent (longi
BMW AG - TIS
24.01.2013 13:20
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
