3 Series E36 318i (M43) CONVER
54 25 000
Removing and installing or replacing
electrical convertible top lid drive unit
Removing left luggage compartment trim,
refer to 51 47 151
Disconnect drives,
refer to 54 34 002.
Unfasten tab washers (convertible top closed) and disconnect
Bowden cables (1) and (2).
Disconnect plug connection (1), detach cable bracket (2) and
expose cable.
Unfasten lower nuts.
Disconnect top and bottom of Bowden cable on emergency
release mechanism.
Remove tab washer (1) and lift out drive linkages (2) for
convertible top lid.
Unscrew top and bottom nuts.
Remove convertible top lid drive with bracket.
Installation:
Adjust convertible top cover drive, refer to 54 25 001
Initializing, refer to 54 34 002
Only replace:
Unfasten screw (1) and remove levers (2).
Unfasten screws (3) and remove convertible top lid drive unit from
retaining plate.
RA Removing and installing or replacing electrical convertible top lid drive unit
BMW AG - TIS
24.01.2013 13:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
