3 Series E36 318i (M43) SAL
11 52 020
Removing and installing/replacing fan clutch
(M43)
Caution!
Left-hand threads.
Lock belt pulley in position using special tool 11 5 050.
Release union nut with special tool 11 5 040 from water pump.
Detach fan impeller with fan clutch from water pump and remove
with fan shroud,
refer to 17 11 031.
Installation:
Tightening torque,
refer to Technical Data 11 52 1AZ.
Note:
Tightening torque 40 Nm when using special tool 11 5 040
is equivalent to 30 Nm on scale of a torque wrench.
Unfasten screws and detach fan from fan coupling.
RA Removing and installing/replacing fan clutch (M43)
BMW AG - TIS
25.01.2013 06:03
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
