3 Series E36 318i (M43) SAL
All
If necessary, disconnect rubber ring on rear-axle carrier.
rear muffler with bracket
Disconnect the rear retaining bracket on left and right sides.
Take off the final muffler downwards and back.
Installation:
Check the rubber mount for damage and replace if necessary.
Preload rubber mount in forwards driving direction by distance
A = 15 mm.
Rear muffler with clamp
Note:
Loosen the collar nut with the clamp on the final muffler.
Take off the final muffler downwards and back.
Installation:
Tightening torque,
refer to Technical Data 18 00 3AZ
RA Removing and installing / replacing rear muffler (M40, M42, M43, M44, M50 B20, M
BMW AG - TIS
25.01.2013 07:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -