3 Series E36 318i (M43) SAL
Unscrew and remove screw cap.
Centre steering gear (by halving total number of turns). In this
setting, marks on steering spindle, cap and case all match. If
necessary, add marks.
Determine dimension (A) with a depth gauge and note down
result. This measurement is required for checking during
installation.
Remove protective cap (1) from steering spindle.
Unfasten nut - brace against square nut on steering spindle.
Remove circlip.
Withdraw steering spindle from case.
RA Dismantling and reassembling power steering gear
BMW AG - TIS
25.01.2013 08:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
