3 Series E36 318i (M43) SAL
Lift out and remove steering-spindle bearing.
Take out bearing inner sleeve.
Installation:
Insert bearing inner sleeve with bevelled end pointing to
steering lock.
Remove shear-off screws.
Installation:
Tighten shear-off screws until heads shear off.
Turn steering lock to position "R".
Press down on steering spindle and take off steering lock.
RA Disassembling and assembling complete steering column
BMW AG - TIS
25.01.2013 08:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -