3 Series E36 318i (M43) SAL
Coat reinforcement plates with zinc dust paint and slide into
remaining side member cover 30 mm deep and weld.
Produce reinforcement plates for B-pillar outer panel and fit in.
Length = 60 mm.
Drill holes for plug welding and deburr. Slide in reinforcement
plates 30 mm deep and weld.
Drill holes for plug welding in side member cover and deburr.
Clean and coat mating surfaces on partial replacement side
member cover with zinc dust paint.
RA Replacing left or right side member cover (partial replacement bottom)
BMW AG - TIS
25.01.2013 10:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -