3 Series E36 318i (M43) TOUR
First locate back of side window with two strips of adhesive tape
(2) (once with base support e.g. Styropor block), then secure front
with C-pillar finisher (1).
Note:
Do not press down further on side window (glue bead can be
squashed, leaks)
Caution!
Remove dirt from residual glue with Sika-Entferner 208
(Sourcing Reference: BMW Parts Service) before glue is
hard. Do not press side window back out. Hardened glue can
only be removed by machine.
Assemble car.
After the hardening time, remove adhesive tapes.
Note:
Leaks can be found by spraying water on the sealing lips or
with an ultrasonic leak detector (refer to BMW Parts Service)
and then eliminated by using a suitable nozzle.
RA Removing and installing left or right rear side window (touring)
BMW AG - TIS
26.01.2013 09:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
