3 Series E36 318i (M44) SAL
Check the chain wheel and replace if necessary.
Align sprocket with woodruff key and install sprocket with timing
chain in position.
Check the chain wheels and replace if necessary.
Place the chain with the chain wheels.
Note:
The arrows on the chain wheels in cylinder axis point up.
Align long bores centrally.
Place the sensor gear onto the inlet chain wheel.
Note:
Arrow on sensor gear in cylinder axis points up.
Insert all chain wheel screws and tighten so that they are free of
play; the chain wheels remain loose.
RA Replacing timing chain (M44)
BMW AG - TIS
27.01.2013 02:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -