3 Series E36 318i (M44) SAL
11 52 020
Removing and installing / replacing fan
coupling (M44)
Caution!
Left-hand threads.
Lock belt pulley in position using Special Tool 11 5 050.
Release union nut with Special Tool 11 5 040 from water
pump.
Take the fan wheel with fan coupling off of the water pump and
remove.
Installation:
Tightening torque,
refer to Technical Data 11 52 1AZ
Note:
Tightening torque 40 Nm when using Special
Tool 11 5 040 is equivalent to 30 Nm on scale of a torque
wrench.
Unfasten screws and detach fan from fan coupling.
RA Removing and installing / replacing fan coupling (M44)
BMW AG - TIS
27.01.2013 02:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
