3 Series E36 318is (M42) COUPE
Inspecting cylinder-head sealing surface
(M42)
Check levelness of the cylinder-head sealing surface with a
standard steel ruler.
Max. levelness deviation 0.03 mm (0.0012").
Remove all attachments from cylinder head to machine sealing
surfaces.
Machining limit, refer to Technical Data.
When machining down 0.3 mm, a repair gasket for the cylinder
head with an extra 0.3 mm thickness is available.
RA Inspecting cylinder-head sealing surface (M42)
BMW AG - TIS
28.01.2013 01:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -