3 Series E36 318is (M42) COUPE
11 21 501
Replacing crankshaft - crankshaft removed
(M42)
Note:
Replacement crankshafts are supplied complete with
corresponding main and connecting-rod bearing shells.
Crankshaft identification
(cast on crank)
M42 B18 = 81 mm stroke
The crankshaft is surface treated and may only be reground in the
factory.
Reground crankshafts are marked with stripes of paint,
refer to Technical Data
1 Coat of paint: Size 1
2 Coats of paint: Size 2,
refer to Technical Data
Cars with manual transmission: Install guide bearing for
transmission main shaft.
Drive in pilot bearing with special tool 11 2 350 or with special
tool 11 2 030 in conjunction with special tool 00 5 500
(handle).
RA Replacing crankshaft - crankshaft removed (M42)
BMW AG - TIS
28.01.2013 01:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -