3 Series E36 318is (M42) COUPE
13 62 531
Replacing temperature sensor for coolant
(M42)
Switch off ignition.
After checking function of Digital Motor Electronics (DME),
refer to 13 00 002
Pull off connectors.
Unscrew temperature sensor (1).
Installation:
Always replace sealing ring.
Interrogate fault memory of DME-control unit, check faults in
memory then cancel fault memory.
Check coolant level and top up if necessary.
RA Replacing temperature sensor for coolant (M42)
BMW AG - TIS
28.01.2013 02:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
