3 Series E36 318is (M42) COUPE
Unscrew rear manifold support.
Remove idling speed control valve.
Unscrew bolts. Unscrew upper manifold section.
Installation:
Check that vacuum hose (1) is securely seated.
Lift upper manifold section until threaded pin (2) is exposed, then
turn counter-clockwise and lift off.
Installation:
Check for tight fit of vacuum hoses on the lower manifold
section.
RA Removing and installing/replacing all fuel injection valves (M42, M43 up to 9/95
BMW AG - TIS
28.01.2013 02:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
