3 Series E36 318is (M42) COUPE
24 61 501
Removing and installing/replacing control
unit (A5S 300J)
The control unit for EGS is located in the engine compartment on
the right-hand side wall.
In vehicles with right-hand drive on the left.
Raise hood lid.
Interrogate and print fault memory prior to removal.
Unscrew insulating cover from separating wall.
Unscrew cover.
Press EGS control unit down off of spring retainers (1 and 2).
Pull out control unit forward through the opening.
RA Removing and installing/replacing control unit (A5S 300J)
BMW AG - TIS
28.01.2013 04:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
