3 Series E36 318is (M42) COUPE
31 35 000
Removing and installing or replacing front
stabilizer
Stabilizer connection on spring strut:
Unscrew left and right nuts.
Installation note:
Wrench surface (1) on ball pin must be parallel to absorber
axis.
Replace self-locking nuts. Tightening torque,
refer to Technical Data 31 35 7AZ
Stabilizer connection on control arm:
Unscrew left and right nuts.
Installation note:
Replace self-locking nuts. Tightening torque,
refer to Technical Data 31 35 7AZ
Unscrew left and right nuts.
Take off stabilizer.
Installation note:
Remove grease from rubber mounts and stabilizer.
Open end of rubber mount faces downwards.
Replace self-locking nuts. Tightening torque,
refer to Technical Data 31 35 1AZ
in normal position,
refer to Technical Data Gr. 32.
RA Removing and installing or replacing front stabilizer
BMW AG - TIS
28.01.2013 05:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -