3 Series E36 318is (M42) COUPE
32 41 553
Dismantling and assembling vane pump
(LuK/Vickers pump)
- Pump removed -
Absolute cleanliness is essential when working on power-
steering pump.
Remove pulley.
Clamp vane pump in vise with pulley flange.
Mark components relative to one another.
1 Holder
2 Bush
3 Rear case section
4 Front case section
5 Holder
Unfasten screws.
Remove case half (3) with spring (6) and valve spool (7).
Remove pressure plate (8) with rotor ring (9) and cylinder pins
(10).
RA Dismantling and assembling vane pump (LuK/Vickers pump)
BMW AG - TIS
28.01.2013 06:04
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -