3 Series E36 318is (M42) COUPE
34 51 520
Removing and installing/replacing ABS
hydraulic control unit
Note:
Note General Data, refer to 34 00 ...
Important!
After finishing work:
Check function of hydraulic control unit -
refer to BMW Diagnosis System.
Installation:
Bleeding brake system, refer to 34 00 047
Switch off ignition.
Disconnect battery negative lead, refer to Gr. 61
Remove air intake hose, refer to 13 62 000
M3:
If necessary, unfasten heating valves and pipes from brackets and
press to one side.
Draw brake fluid out of expansion tank with a suction bottle
reserved for exclusive use with brake fluid.
RA Removing and installing/replacing ABS hydraulic control unit
BMW AG - TIS
28.01.2013 07:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
