3 Series E36 318is (M42) COUPE
Position welding spots at the side panel joint surface so close
together, that a continuous seam is produced.
Caution!
Always wait for one spot to cool down slightly before
producing an adjacent welding spot.
Danger of distortion!
Grind welding spots on entrance until smooth.
Weld car jack take-up from inside. Grind welding spots until
smooth.
Tin entrance joint surface and grind until smooth.
RA Replacing left or right side member cover (partial replacement a-pillar and belo
BMW AG - TIS
28.01.2013 08:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -