3 Series E36 318is (M42) COUPE
Produce separate welding spots on side panel joint surface so
close together that a continuous welded seam is produced.
Caution!
Always wait for one spot to cool down slightly before
producing an adjacent welding spot.
Danger of distortion!
Braze B-pillar, door opening at bottom and wheel housing joints.
Tin out and grind down joints at bottom of door opening and wheel
housing.
Cringe edge of wheel housing.
Tin out and grind down side panel replacement section joint.
RA Replacing right rear side panel (partial replacement B-pillar - wheel housing)
BMW AG - TIS
28.01.2013 09:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
