3 Series E36 318is (M42) COUPE
Loosen screws in lower section of trunk lid lock until it is just able
to move and centers itself.
The lower section of the trunk lid lock must not scrape against
trunk lid lock.
Adjust lower section of trunk lid lock:
Close trunk lid, holding down the lock button to prevent the trunk
lid lock from engaging.
This enables lower section of trunk lid lock to adjust itself correctly.
Open trunk lid.
Tighten screws on lower section of trunk lid lock.
Check adjustment of trunk lid and trunk lid lock, repeating
adjustment if necessary.
Unscrew detent buffer until locked trunk lid lies flush on left/right
detent buffers.
Caution!
The trunk lid must not be higher than the side panels,
otherwise there is preload on height adjustment!
RA Adjusting trunk lid lock (sedan, coupé and convertible)
BMW AG - TIS
28.01.2013 09:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
