bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing Drive Unit For Rear Left Or Right Hinged Windo|Page 2044 > < 1 RA Replacing Toggle Catches On Rear Left And Right Vent Windows|Page 2042
Page 1
background image

51 36 010

Removing and installing/replacing drive unit
for rear left or right hinged window

Remove rear side trim panel,

refer to 51 43 000 .

Lift out clips and fold down insulating mat.

Release screws and remove cover.

Pull off connectors.

Mill down rivets and remove drive unit (1).

Installation:

Replace ground off rivets with M6 x 10 screws, 6.4 mm dia.
washers and nuts.

Tightening torque 51 33 2AZ

RA  Removing and installing/replacing drive unit for rear left or right hinged windo

BMW AG - TIS

28.01.2013  10:01

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

2 RA Removing And Installing_replacing Drive Unit For Rear Left Or Right Hinged Windo|Page 2044 > < 1 RA Replacing Toggle Catches On Rear Left And Right Vent Windows|Page 2042