3 Series E36 318is (M44) CONVER
Unfasten steering spindle from steering gear.
This operation is described in section on removing and installing
the steering gear,
refer to 32 13 060
Unscrew engine mountings on bottom left and right.
Brace front axle support with special tool 00 2 030 in
conjunction with special tool 31 2 220.
Unfasten left and right control arm from engine carrier.
Unfasten screw connection on front axle support and lower the
front axle support.
These operations are described as part of the procedure for
replacing front-axle carrier,
refer to 31 11 001
Note:
The steering gear must not be disconnected from the front
axle support.
Release the bracket for the fuel lines from the oil pan.
Automatic transmission:
Removing oil pipes from oil pan.
RA Removing and installing, sealing or replacing oil pan (M44)
BMW AG - TIS
03.02.2013 20:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
