3 Series E36 318is (M44) CONVER
Installation:
Replace seal.
Note:
Separate seals for the top gear case cover are available as
spare parts.
Installation:
Clean groove for rubber profile seal and sealing surfaces of
remains of seal.
Apply Drei Bond 1209 at both the upper and lower sealing
surfaces of the cylinder head, refer to BMW Parts Service.
Installation:
Install special tool 11 4 110.
Fit new seals.
Coat top and bottom of seals with Drei Bond 1209.
Installation:
Apply Drei Bond 1209 sealing compound thinly and evenly
to the groove ends.
Seat new rubber seal in groove.
RA Removing and installing, sealing or replacing timing case cover at top (M44)
BMW AG - TIS
03.02.2013 20:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
