3 Series E36 318is (M44) CONVER
Unscrew conrod bearing cover.
Insert special tool 11 3 480 in conrod.
Remove conrod with piston from cylinder head side.
Lift out retaining ring and press out piston pin.
Caution!
Piston and piston pin are paired and must not be fitted
individually.
Installation
Installation of pistons is described separately from removal.
Assembly sequence for removal and installation is different.
RA Removing and installing or replacing all pistons (M44)
BMW AG - TIS
03.02.2013 20:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
