3 Series E36 318is (M44) CONVER
Place the chain with the chain wheels.
Note:
Arrow on chain wheel in cylinder axis points up.
Align long bores centrally.
Place the sensor gear onto the inlet chain wheel.
Note:
Arrow on sensor gear in cylinder axis points up.
Insert all chain wheel screws and tighten so that they are free of
play; the chain wheels remain loose.
Install hydraulic chain tensioner.
Caution!
Note installation instructions,
refer to 11 31 091
RA Replacing camshaft (M44)
BMW AG - TIS
03.02.2013 21:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
