3 Series E36 318is (M44) CONVER
Withdraw inner bearing race without special tool 33 4 406:
If inside bearing inner ring remains on stub axle after bearing unit
has been pulled off, unscrew guard plate.
If necessary, bend dust guard plate so that guard plate can be
removed.
Bend back dust guard plate (1) and apply pulling claws of special
tool 00 7 500 behind bearing inner race (2).
Pull off bearing inner race with special tool 00 7 500 and
31 2 106.
Note:
Correct assembly of extractor claws on special
tool 00 7 500.
Installation:
If applicable, install guard plate.
Install dust guard plate screws.
RA Replacing bearings (wheel hub) for front wheel
BMW AG - TIS
04.02.2013 00:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -