bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
10 RA Replacing One Rubber Mount In Lower Control Arm (control Arm Removed) > < 8 RA Replacing One Rubber Mount In The Semi-trailing Arm (semi-trailing Arm Removed)

3 Series E36 318is (M44) CONVER

Page 1
background image

33 32 671

Replacing one rubber mount in the upper
control arm (control arm removed)

Press out rubber mount with special tool 33 3 351/352.

Place new rubber mount at chamfered end of control arm bore.
Longer collar (A = 17 mm) of rubber mount must point upwards
here.

Press in rubber mount with special tool 33 3 351/352 so that it
is flush.

RA  Replacing one rubber mount in the upper control arm (control arm removed)

BMW AG - TIS

04.02.2013  01:24

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

10 RA Replacing One Rubber Mount In Lower Control Arm (control Arm Removed) > < 8 RA Replacing One Rubber Mount In The Semi-trailing Arm (semi-trailing Arm Removed)