bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

7 RA Removing And Installing Or Replacing Left Or Right Rear Brake Caliper|Page 1560 > < 6 RA Removing And Installing Or Replacing Left Or Right Wheel-brake Cylinder
Page 1
background image

34 21 745

Removing and installing or replacing left or
right rear brake caliper

Remove rear wheel.

Important!

After completing tasks, bleed brake system.

Apply pedal prop and depress brake pedal slightly. This prevents
brake fluid from emerging from the expansion tank and air from
entering the system when the brake lines are opened.

Loosen screws (1). 

Installation:

Tightening torque, 34 21 3AZ.

Disconnect brake hose (2).

Right side:

Disconnect plug connection for brake lining sensor.

Pull off fist caliper towards rear of vehicle.

Installation:

Install brake hose without torsional stress.

RA  Removing and installing or replacing left or right rear brake caliper

BMW AG - TIS

04.02.2013  01:50

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

7 RA Removing And Installing Or Replacing Left Or Right Rear Brake Caliper|Page 1560 > < 6 RA Removing And Installing Or Replacing Left Or Right Wheel-brake Cylinder