3 Series E36 318is (M44) CONVER
Hexagon head or Torx mounting screws:
Lower door window to approx. 250 mm.
Caution!
Disconnect power window motor plug.
Close rotary tumbler lock by hand.
Note safety instructions on risk of finger-jam,
refer to 51 32 ...
Unfasten screws in bracket on rear guide rail.
Tightening torque, refer to Technical Data 51 32 2AZ
Hexagon socket mounting screws:
Lower door window to about 105 - 110 mm.
Unfasten lower screw through rear adjustment bore (4 mm hex
cap screw) on retaining bracket.
Tightening torque, refer to Technical Data 51 32 2AZ
Lower door window to about 65 ... 70 mm.
Unfasten top screw through rear adjustment bore (4 mm hex cap
screw).
Tightening torque, refer to Technical Data 51 32 2AZ
Loosen screws (1 and 2).
Installation:
First tighten screws on the door window glass and then
tighten screws (1 and 2) on the window guide rail.
RA Removing and installing/replacing front left or right door window (coupé, conver
BMW AG - TIS
04.02.2013 03:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
