3 Series E36 318is (M44) CONVER
-
Cable on alternator
-
Screw connection on engine wiring harness
-
Cable on starter
-
Plug connection on coolant sensor
-
Plug connection on oil pressure switch
-
Disconnect cable
-
Plug connection on injection valves
-
Plug connection on knock sensors
-
Engine wiring harness, right (positive terminal, control unit, diagnosis receptacle)
-
Engine wiring harness, left (where applicable, positive terminal, engine connector, on fuse box)
Installation:
Route new wiring harness roughly in engine compartment. Connect all plug connections shown in wiring
harness drawings and perform a function check.
RA Wiring harness - replace engine section (M44)
BMW AG - TIS
04.02.2013 05:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
