3 Series E36 318is (M44) COUPE
11 12 000
Removing and installing/sealing cylinder head
cover (M44)
Note instructions on disconnecting and connecting the
battery,
refer to General Information HG 12
Disconnect the battery ground cable and the battery
positive cable.
Remove the ignition coil from the spring strut dome.
Remove battery.
Loosen the screws and remove the battery bracket.
Slightly lift the grille and loosen the cable duct from the end
firewall (air manifold). Pull the cable duct upwards.
Take off cover.
RA Removing and installing/sealing cylinder head cover (M44)
BMW AG - TIS
05.02.2013 03:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -