3 Series E36 318is (M44) COUPE
Tighten down the cylinder-head bolts in order 1 ... 10.
Tightening torque,
refer to Technical Data 11 12 6AZ
Place the adjusting screw of the slide rail free of play on the
cylinder head.
Insert the screw and tighten down the slide rail.
Locate camshaft with Special Tool 11 3 240 in firing TDC
position of first cylinder.
RA Removing and installing cylinder head (M44)
BMW AG - TIS
05.02.2013 03:56
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
