3 Series E36 318is (M44) COUPE
11 23 010
Removing and installing or replacing
vibration damper (M44)
Special tools required:
•
11 2 150
•
11 2 410
If necessary, remove drive belt and belt pulley for the air-
conditioning compressor.
Remove alternator drive belt.
Attach special tool 11 2 150 in conjunction with special tool
11 2 410 .
When releasing and tightening down central bolt, grip special
tool 11 2 150 with assistance of a second person.
If it is not possible to grip the tool securely: Remove mounted
parts until the special tool 11 2 150 can be supported on the
engine carrier without damaging other components.
Caution!
Protect engine bracket from damage.
Insert wood between engine carrier and special tool 11 2 150 .
Unscrew central bolt.
Replace radial seal in lower timing case cover.
RA Removing and installing or replacing vibration damper (M44)
BMW AG - TIS
05.02.2013 04:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
