3 Series E36 318is (M44) COUPE
11 40 000
Checking engine oil pressure (M40 / M42 /
M43 / M43TU / M44)
Version with central screw:
Unscrew oil-filter cover
Note:
Oil flows from oil-filter housing into oil pan.
Installation:
Replace sealing ring.
Tightening Torque,
refer to Technical Data 11 42 2AZ.
Installation:
Replace sealing ring in oil-filter cover and sealing ring on bolt.
Check/replace sealing rings on special tool 11 4 170.
Install special tool 11 4 170.
Tightening Torque,
refer to Technical Data 11 42 2AZ.
Connect special tools 13 3 061 / 063.
Start engine and check engine oil pressure,
refer to Technical Data.
RA Checking engine oil pressure (M40 / M42 / M43 / M43TU / M44)
BMW AG - TIS
05.02.2013 04:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -