3 Series E36 318is (M44) COUPE
Allow too much oil to escape or top up with insufficient oil.
To top up ATF, attach filler neck (2) (refer to BMW Parts Service)
to filler aperture.
Add ATF until it runs out. Screw in and tighten filler plug.
Installation:
Check sealing ring, replacing if necessary.
Tightening torque,
refer to Technical Data 24 11 7AZ.
ATF level too high
Strong foaming, loss through splashing, high temperatures at high
speeds.
Oil lost through vent.
ATF level too low:
Rattling of valves, foaming, spinning of engine.
General malfunction.
RA Removing and installing automatic transmission (A4S 270R/ 310R)
BMW AG - TIS
05.02.2013 07:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 12 -
