3 Series E36 318is (M44) COUPE
•
If necessary, attach spoiler adapter.
•
Install brake tensioner.
•
Perform input measurement in accordance with equipment
manufacturer's instructions.
•
Compare specified values with actual values.
Only in event of customer complaint (e.g. poor driving
performance):
Important!
Do not remove screws/bolts (front axle carrier to engine
carrier / body).
Slacken all screws/bolts (front axle carrier to engine carrier / body)
and then retighten to specified torque.
Refer to Lowering front axle carrier.
RA Standard chassis / wheel alignment with DIN load
BMW AG - TIS
05.02.2013 09:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
