3 Series E36 318is (M44) COUPE
Pull rack and bearing bush (1) out of pipe.
Drive radial shaft seal out of bearing bush (1) with special
tool 32 1 140 / 210 and 33 3 331.
Drive radial shaft seal out of pipe with special tool 32 1 140
/210.
Carefully drive bearing out of steering spindle housing with a
punch. This improves access to radial shaft seal.
RA Dismantling and reassembling power steering gear
BMW AG - TIS
05.02.2013 09:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
