3 Series E36 318is (M44) COUPE
33 32 520
Replacing one front trailing arm rubber mount
(trailing arm removed)
Special tools required:
•
00 8 550
•
33 3 144
•
33 3 145
•
33 3 222
•
33 3 223
•
33 3 227
•
33 3 228
•
33 3 280
•
33 3 314
•
33 3 324
•
33 3 340
Unscrew bolt and remove console.
Installation:
With special tool:
Secure special tool 33 3 280 to bearing pedestal with a
screw and align to wheel center. Screw bearing pedestal
down in this position.
Tightening torque 33 32 12AZ.
Installation:
Without special tool:
Align bearing block on center point of wheel with a rod (
∅
= 8 mm).
Tightening torque 33 32 12AZ.
RA Replacing one front trailing arm rubber mount (trailing arm removed)
BMW AG - TIS
05.02.2013 10:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -