3 Series E36 318is (M44) COUPE
Correct the sheet-metal flange in area (C), if necessary, to run
uniformly with the flange inclination in area (A) and the flange
inclination on the roof joint.
Have flange inclination on A- and B-pillars run out downwards
uniformly.
Caution!
Replace the hose seal if sheet-metal flange (B) is more than
1.5 mm longer than test surface (3).
RA Aligning front doors
BMW AG - TIS
05.02.2013 12:00
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 13 -
