3 Series E36 318is (M44) COUPE
63 12 001
Removing and installing/replacing complete
left-hand headlight assembly
Remove suction-filter housing and air-mass sensor,
refer to Group 13
Turn connector 1 and remove. Disconnect connector 2.
Lever out retaining clip from top and pull turn-indicator light
forwards.
Unscrew screws and remove radiator cover.
Caution!
Do not twist expanding rivet (1). Brace with wrench. The
expanding rivets (1) are used to adjust the headlight on the
body.
RA Removing and installing/replacing complete left-hand headlight assembly
BMW AG - TIS
05.02.2013 14:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
