bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

17 RA Test Mode For BMW Car Radio (Bavaria C III)|Page 2708 > < 16 RA Checking Connecting Wires|Page 2706
Page 1
background image

65 99 ...

Test Mode for BMW Car Radio (Bavaria C III)

The "BAVARIA C III" device has a test mode with which various items of internal information can be displayed and with
which various operating modes can be adjusted.

Starting test operation:

Press keys "2" and "5" simultaneously while switching the radio on. A capital "S" appears in the display next to the
wave range. The selected station is still received.

This service mode is abandoned by switching the radio on and off once.

Change increase in loudspeaker volume when traffic information is broadcast

Press the "VF" button for approx. 4 seconds until a "0" appears in the display. The station will be a little louder. With
search run button, volume can be raised in 5 steps.

The factory setting is "0".

The regulating range amounts to 

±

 6,25 dB.

This mode is abandoned by pressing "VF" key again. The test mode remains activated.

Adjusting roadspeed-dependent volume (GAL)

Press station button "3" for approx. 4 seconds until a "2" appears in the display. This value can be changed by using
the automatic tuning rocker.

The factory setting is "2".

Regulation range: 

"1" : weak increase

"2" : medium increase

"3" : strong increase

RA  Test Mode for BMW Car Radio (Bavaria C III)

BMW AG - TIS

05.02.2013  15:56

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

17 RA Test Mode For BMW Car Radio (Bavaria C III)|Page 2708 > < 16 RA Checking Connecting Wires|Page 2706