3 Series E36 318is (M44) SAL
Place the sensor gear onto the inlet chain wheel.
Note:
Arrow on sensor gear in cylinder axis points up.
Insert all chain wheel screws and tighten so that they are free of
play; the chain wheels remain loose.
Install hydraulic chain tensioner.
Caution!
Note installation instructions,
refer to 11 31 091
Tighten down the chain wheels.
For tightening torque,
refer to Technical Data 11 31 3AZ
Remove Special Tools 11 2 300 and 11 3 240.
Assemble engine.
RA Removing and installing cylinder head (M44)
BMW AG - TIS
06.02.2013 17:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -
