3 Series E36 318is (M44) SAL
Installation:
Tighten the screws.
Remove special tool 11 4 110, insert and tighten the remaining
screws.
Tightening torque,
refer to Technical Data 11 14 1AZ.
Caution!
If all screws are tightened, they must be tightened again in a
second operation.
RA Removing and installing, sealing or replacing timing case cover at top (M44)
BMW AG - TIS
06.02.2013 17:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
