3 Series E36 318is (M44) SAL
11 34 560
Replacing all valve-shaft seals - cylinder head
removed (M44)
Preliminary work is described in section on dismantling and
assembling the cylinder head,
refer to 11 12 503
Removing all valve springs,
refer to 11 34 715
Remove valve stem seal with Special Tool 11 1 480.
Lubricate valve stem with oil and insert valve.
Fit Special Tool 11 1 960.
Coat new valve stem seal (1) with oil and install.
Press valve stem seal firmly home by hand with Special
Tool 11 1 200.
RA Replacing all valve-shaft seals - cylinder head removed (M44)
BMW AG - TIS
06.02.2013 17:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -