3 Series E36 318is (M44) SAL
Remove scrap metal.
Straighten and grind joint surfaces.
Uncover welded seams on battery console and drill off welded
spots.
Cut out wheel housing in front of engine firewall roughly.
Caution!
Don't cut off metal lip (1) and reinforcement on tunnel (2).
Note:
View from engine compartment.
View of firewall after cutting off wheel housing.
Caution!
Metal lip (1) is not cut off.
Note:
View from A-pillar in direction of engine compartment.
RA Replacing right front wheel housing (partial replacement up to engine firewall)
BMW AG - TIS
06.02.2013 23:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -