3 Series E36 318tds (M41) COMP
Unfasten bearing pin from tensioning rail.
Lift tensioning rail upwards to remove.
Unfasten bearing pin from chain guide.
Unscrew bolt connection at timing-case cover.
Note:
Screw connection (1) is arranged as a stud bolt with a nut.
Unfasten left and right screw connection.
Remove line for leakage oil from the injector valves.
RA Removing and installing cylinder head (M41)
BMW AG - TIS
06.02.2013 20:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
